Embedded Engr 1

Honeywell — Bengaluru, Karnataka

₹6–10 LPA (HireSetu estimate) · 0–3 yrs exp · Freshers eligible · Full-time · onsite

HireSetu listing reference b64b63 — confirm requirements below, then apply on the employer site.

Quick answer: Firmware on Cortex-M plus VHDL/Verilog on FPGA, both feeding laser-based gas and flame sensors that carry functional safety certification. The laser spectroscopy knowledge on this listing is a real requirement for a 0-3 year hire.

From Honeywell's job posting

Embedded Engineer I

Industrial Safety – “Safety That’s Always on the Lookout”

Accidental gas leaks pose a huge threat to properties, environment and human life. Therefore, Honeywell manufactures a full and comprehensive range of gas detection products dedicated to all types of industrial facilities, from smaller boiler rooms to large petrochemical plants and oil refineries.

Honeywell’s wide range of technologies and devices – gas detectors, flame detectors, natural gas alarms – provide exceptional protection at every level, ensuring the most favorable coverage, detection, hazard mitigation and life protection.

We are seeking a skilled Embedded / FPGA Engineer dedicated to developing advanced embedded, FPGA-enabled signal acquisition and control systems for safety-critical gas and flame detection products. The ideal candidate will have hands-on experience in embedded system design, FPGA-based data acquisition and signal-processing implementation, laser driver development, and a good working knowledge of laser spectroscopy principles, while adhering to functional safety requirements and relevant standards such as IEC 61508 Safety Integrity Level 2 and EN 60079-29-1.

KEY RESPOSIBILITIES

  • As part of Industrial Safety Engineering group, you will be one among the team designing new products for Industrial Safety Line of business with key focus on Fixed gas and Flame detection sensor solutions and Controllers
  • Participate in the development of embedded software and systems, ensuring they meet functional safety requirements. Design and implement new features in embedded platforms, managing the entire software development lifecycle, from requirements analysis to implementation and testing.
  • Develop and execute test plans for embedded software, including unit tests, integration tests, and system tests. Use automated testing frameworks and tools to ensure high test coverage and effective testing strategies. Analyze testing results to identify and resolve issues swiftly.

Develop and validate FPGA-based interfaces and processing blocks for high-speed sensor data capture, timing control, filtering, co-adding, and real-time signal-processing workflows.

Support laser driver development activities including current/temperature control interfaces, modulation control, protection features, calibration support, and lab validation for optical sensing platforms. Collaborate with optical and spectroscopy teams to translate laser spectroscopy requirements into embedded firmware, FPGA logic, control algorithms, diagnostic utilities, and test automation.

  • Additional responsibilities include proof-of-concept firmware development, FPGA/SoC bring-up support, high-speed data acquisition software applications, laser driver control firmware, technical report generation, documentation, and progress reporting.

Qualifications

QUALIFICATION: A Masters degree or Bachelor degree in Electronics Engineering with 0 to 3 years of experience with inclination towards Embedded System design and control systems

Essential qualifications

  • Proficiency and hands on experience in C, Python or C++ programming
  • The candidate should have experience in firmware development for Cortex M3/M4 and ARM V7 on cross compilers like IAR Embedded Workbench, Eclipse, and MPLAB.
  • The candidate should be proficient in working with wired communication protocols such as, SPI, I2C, WDT, and TIMER.
  • Ability to statistically analyse data with software tools like MS Excel/MATLAB/Minitab
  • Good know-how of laser spectroscopy, optical sensing, interferometric signal acquisition, spectral analysis, gas absorption measurement, and lab-based validation of electro-optical systems.
  • Experience or strong interest in laser driver development, including current drivers, TEC/temperature control, modulation, protection circuits, calibration, and embedded control loops.
  • Knowledge of FPGA-based data acquisition, high-speed ADC interfacing, clocking, buffering, DMA/streaming concepts, and real-time processing pipelines will be an added advantage.
  • Hands-on exposure to FPGA design and verification using VHDL/Verilog/SystemVerilog, FPGA development tools, timing closure concepts, and hardware debugging with logic analyzers or embedded analyzers.
  • Strong understanding of signal processing techniques and advanced mathematical concepts, including FFT-based analysis, filtering, linear algebra, calculus, and statistical analysis.

The employer’s company overview, benefits, equal-opportunity statement and generic skills tables are left out here; they are on the original posting.

Text from Honeywell's official job posting, formatted by HireSetu. The employer's own page is the final word on details.

Two skill sets on one desk

The title says embedded, and the work is genuinely split. One half is firmware on Cortex M3/M4 and ARMv7 with IAR, Eclipse or MPLAB: C on a microcontroller, SPI and I2C, timers and watchdogs. The other half is FPGA logic in VHDL or Verilog doing high-speed ADC capture, timing control, filtering and co-adding. These are not two teams' jobs handed to one person by accident. The FPGA pulls in the sensor data and the firmware drives the laser behind it, so you'd sit at both ends of the same chain.

Then the part most embedded candidates at your stage cannot claim: laser spectroscopy, gas absorption measurement, interferometric signal acquisition. It sits in the essential list next to TEC control, modulation and protection circuits for the laser driver.

Put the acquisition chain first on your CV

A general embedded CV opens with RTOS work. This one should open with FPGA projects that touch ADCs, clocking, buffering or DMA streaming, and say how you closed timing. After that, firmware on an ARM Cortex part with a named cross compiler, protocols and peripherals spelled out. MATLAB or Minitab work belongs under both, because the listing wants someone who can read test data statistically. If a college or internship lab had you near a photodiode, spectrometer or optical bench, that line earns its place here.

Safety certification shapes the schedule

IEC 61508 SIL 2 and EN 60079-29-1 mean the code and the FPGA logic get documented and tested to a standard. Unit, integration and system tests with automated frameworks are named in the responsibilities, and a change that fixes a bug still needs its evidence trail. One question to put to the team: which product line, fixed gas detection, flame detection or controllers, your first project lands in, since the sensor physics differ between them.

The day-to-day is bench work: SoC bring-up, a clock that will not settle, an optical signal that drifts with temperature, and a detector that has to alarm correctly every single time.

Two standards and a temperature loop

IEC 61508 SIL 2 sets a target for how rarely a safety function may fail when it is called on, and the route there is evidence: requirements traced into code, tests traced back to requirements, a record of every change to either. EN 60079-29-1 fixes how a flammable-gas detector must behave, with response time, alarm level and drift across temperature judged against stated limits.

The employer guide places this work in Honeywell Technologies, the automation company left after the materials and aerospace separations. Its industrial safety team designs the FPGA-based signal acquisition and laser driver electronics inside gas and flame detectors for refineries and petrochemical plants.

FPGA blocks and laser driver controls

An FPGA interface in this work reads high-speed ADC samples, keeps their timing with clocking and buffering, and streams them through DMA into filter and co-add blocks for real-time signal processing. Co-adding sums repeated scans so a weak absorption signal rises above noise.

Laser driver work covers the current and temperature control interfaces around the laser, modulation of the drive signal, protection circuits and calibration support. The posting lists lab validation of those optical sensing platforms, and collaboration with optical and spectroscopy teams to turn spectroscopy requirements into firmware, FPGA logic and control algorithms. Diagnostic utilities and test automation are named too, along with proof-of-concept firmware and FPGA/SoC bring-up support.

Prepared from Honeywell's job posting and checked against it before publishing. See our Editorial Policy.

How to apply

  1. The Apply button opens this job on Honeywell's careers site (careers.honeywell.com).
  2. Its requisition number is 156905; search for it on the careers site if the link ever stops working.

Apply on Honeywell's site

No fees, ever. HireSetu never charges candidates, and no genuine employer asks for money to apply, interview or join. If anyone asks you to pay, stop and report the job.

Similar openings on HireSetu

View Embedded Engr 1 on HireSetu · More Honeywell jobs · Embedded jobs · Jobs in Bengaluru · Career Insights · FAQ · Companies

HireSetu
Career Intelligence Platform