Engineer – Power Electronics

Eaton — Pune, Maharashtra

₹3–7 LPA (HireSetu estimate) · 0–5 yrs exp · Freshers eligible · Full-time

HireSetu listing reference ee1fe6 — confirm requirements below, then apply on the employer site.

Quick answer: The job is DC-DC converter and inverter design: schematics, high-frequency magnetics, Spice simulation and the EMI and standards work that wraps around it. The 0-5 years at the top is loose; the qualification text asks for an MTech or ME with 2+ years, or a BTech or BE with 4+.

From Eaton's job posting

What you’ll do

The primary responsibility of this role is to perform design, simulations and analysis of power electronic circuits to meet customer/product specific technical, cost and market related technology requirements.

"• Demonstrates the knowledge in high power electronics design especially in Power Electronics DC-DC converter and Inverter design

  • Experience in Magnetics design in High frequency transformer and inductor
  • Hands-on experience in Power Electronics Simulation tools like PSpIce and LTSpice Simulation.
  • Good in circuit level analysis like steady state and transient analysis
  • Prepares schematics by using computer assisted engineering design software Spice
  • Responsible for activity planning, execution and closing of assigned activities.
  • Plans, Organizes, and leads smaller assigned tasks / projects.
  • Basic knowledge in EMC filter selection
  • Good Knowledge of IEC, CISPR, ISO standards.
  • Good knowledge on PCB design guidelines for SI, high speed design & EMI/EMC."

Qualifications

Required: Bachelor’s or Master's Degree in Power Electronics and Drives Engineering with 0-5 years design experience.

"• Total relevant work experience: MTech/ME with 2+ years or BTech/BE with 4+ years."

Skills

  • Hands-on experience in Power Electronics design like converters and Inverters, Simulation tools like PSpIce Simulation, LTSpice Simulation.
  • It would be good to be aware of Ansys simulation.

"Required

  • Sound knowledge of electrical & electronic design especially in Inverter and converters design
  • Experience of full Hardware development life cycle including requirements management, design, development, verification & validation, qualification & certification testing.
  • Experience in designing and implementing different AC-DC, DC-DC converters & motor inverters for different applications, including the selection of switching devices, gate driver selection, modulation techniques and filter design.
  • Knowledge of Si and Silicon Carbide (SiC) and Gallium Nitride (GaN) power semiconductors and their application in power electronics to improve efficiency and performance.
  • Ability to integrate power electronic systems into larger electrical systems, understanding system-level interactions, and ensuring seamless compatibility.

Proficiency in troubleshooting power electronic systems, conducting failure analysis, and implementing corrective actions to resolve issues and improve product reliability.

  • Should be able to analyze the analog & digital Circuits for Functional, performing FMEA’s, Stress, Derating, Worst-case & Tolerance study using analysis.
  • Good to have Knowledge of DO-160, DO178/DO254, IEC, SAE standards and Certification processes.

Desired

  • Good knowledge on PCB design guidelines & EMI/EMC.
  • Strong knowledge in the design and development of electronics, both high power and low power, analog, and digital.
  • Strong knowledge on Electronics controller product lifecycle management within Aerospace.
  • Strong knowledge in Power Converter design.
  • Good working experience on simulations any of the tool Pspice, Matlab, Simulink, SiMetrix, PLECS.

Special

  • Automotive/Aero/Defense domain knowledge for High power design & layout rules expertise
  • Strong knowledge of EMI / EMC certification and environmental compliances – CE, e/E markings process."

"• Good interpersonal, written and oral communication skills.

  • Self-motivated and goal-oriented individual."

Text from Eaton's official job posting, formatted by HireSetu. The employer's own page is the final word on details.

Your degree sets the entry point

Read the qualification line before you get attached to the 0-5 years band. It asks for an MTech or ME with 2+ years, or a BTech or BE with 4+. A fresh BE has no way through this posting, however good the final-year project was.

The specialisation is named as well: Power Electronics and Drives. If that's your master's, you're the profile they wrote the ad around. If yours is power systems or controls, your converter work has to carry the application on its own.

Magnetics and converters go first

High-frequency transformer and inductor design sits at the top of the list, next to converter and inverter schematics. Lead with a converter you built: what it converted, the switching devices you picked, the magnetics you specified, and the PSpice or LTSpice runs that backed it up.

Si, SiC and GaN device selection, gate drivers, modulation and filter design belong in that same block. ANSYS and PLECS are worded as nice-to-have, so they go lower down. PCB layout guidelines for signal integrity and EMI are mentioned too, and worth a line if you've done board work.

Derating and worst-case work

FMEA, stress, derating, worst-case and tolerance studies are asked for directly, along with steady-state and transient circuit analysis. That's the unglamorous half of power electronics and the half that decides whether a design ships.

Revise what SiC switching edges do to EMI, why leakage inductance in a high-frequency transformer causes trouble, and what a gate driver has to survive in a fault. One account of a design that failed a test and how you traced the cause is worth more than a list of topologies you've read about.

The standards point at aerospace

IEC, CISPR, ISO and SAE appear in the required standards knowledge, and ANSYS plus environmental compliance sit nearby. DO-160 and DO-178/DO-254 are listed as good to have, and aerospace controller lifecycle management appears under desired. Between those and the CE and e/E marking work, this looks like ruggedised or airborne hardware, where certification evidence and traceability follow every change.

Automotive and defence domain knowledge is called out for layout rules too. Pune sites run more than one product line, so the standards you'd work in shift with the team you land on.

Prepared from Eaton's job posting and checked against it before publishing. See our Editorial Policy.

How to apply

  1. The Apply button opens this job on Eaton's careers site (eaton.eightfold.ai).
  2. Its requisition number is 687239947040; search for it on the careers site if the link ever stops working.
  3. The site builds your profile from your resume; check what it pulled before you submit.

Apply on Eaton's site

No fees, ever. HireSetu never charges candidates, and no genuine employer asks for money to apply, interview or join. If anyone asks you to pay, stop and report the job.

Similar openings on HireSetu

View Engineer – Power Electronics on HireSetu · More Eaton jobs · Electronics jobs · Jobs in Pune · Career Insights · FAQ · Companies

HireSetu
Career Intelligence Platform