Engineer I – Robotics
NewSpace — Bengaluru
₹3–6 LPA (HireSetu estimate) · 0–1 yrs exp · Freshers eligible · Full-time · onsite
HireSetu listing reference 2bd02e — confirm requirements below, then apply on the employer site.
Quick answer: A 0 to 1 year robotics role in Bengaluru working on multirotor UAVs, with PX4 or ArduPilot flight stacks at the centre of it. The application that gets read is the one carrying a drone you assembled, tuned or flew.
From NewSpace's job posting
Engineer I - Robotics
0-1
Job Area
Autonomy, Innovation, and Research > Robotics
What this Role Offers
- Opportunity to work with advanced UAV and robotics technologies under mentorship from senior engineers.
- Hands-on exposure to real-world flight testing and system integration.
- Rapid skill development across autonomy, perception, controls, and embedded systems.
- A collaborative environment with access to cutting-edge tools, simulators, and hardware platforms.
About the Role
The Engineer I position is designed for recent graduates with foundational knowledge in robotics or control systems for unmanned aerial vehicles (UAVs). The role involves supporting the development, integration, and testing of UAV systems under the guidance of senior engineers. Candidates must demonstrate academic or project-level experience with drones or robotics, as well as a strong willingness to learn advanced autonomy and flight systems.
This role requires strong proficiency in low-level flight firmware (ArduPilot and/or PX4), embedded systems, and high-performance onboard autonomy, along with a proven ability to lead sensor fusion, state estimation, navigation, and control systems.
Key Responsibilities
- Assist in the development and integration of UAV subsystems, including navigation, perception, and basic autonomy components.
- Support firmware configuration, parameter tuning, and flight stack setup on PX4/ArduPilot-based platforms.
- Contribute to sensor integration tasks involving IMUs, cameras, GPS, radar, and LiDAR.
- Work with simulation tools (Gazebo, Issac Sim) to test features and validate system performance.
- Participate in ground and field testing activities, including pre-flight checks, log collection, and troubleshooting.
- Implement and debug scripts, tools, and small modules in Python or C++ to support development workflows.
- Collaborate with cross-functional teams in hardware, avionics, and software for system bring-up and testing.
- Maintain clear documentation of development activities, test results, and process improvements.
Basic Requirements
- Bachelor’s or Master’s degree in Robotics, Aerospace Engineering, Electrical/Electronics Engineering, Mechatronics, or Computer Science.
- 0–1 year of industry experience (internships, academic projects, or UAV competitions preferred).
- Exposure to UAVs, drones, or robotics, demonstrated through projects, competitions, or research work.
- Basic understanding of control systems, state estimation, or kinematics.
- Familiarity with PX4/ArduPilot, MAVLink, or drone flight controllers (Pixhawk or similar).
- Programming knowledge in Python and/or C++.
- Experience working in Linux OS.
- Hands-on experience with simulation tools (Gazebo, MATLAB, Issac Sim) is a plus.
- Strong analytical and debugging abilities, with a willingness to learn and grow.
- Good communication and teamwork skills.
Preferred Skills
- Participation in UAV/robotics competitions (e.g., RoboRacer, ROBOCON, ROSCon, SAE Aero, DIY drone building).
- Experience with ROS/ROS2 or robotics middleware.
- Basic computer vision exposure (OpenCV, image processing).
- Experience assembling or tuning multi-rotor or fixed-wing platforms.
- Familiarity with Git, Linux, and embedded systems.
- Understanding of sensor fusion concepts (e.g., EKF basics).
- Experience with Arduino, Nvidia Jetson, STM32, and ESP32.
Additional Considerations for Master’s Graduates
Master’s candidates may be considered for an enhanced designation or role variant (e.g., Engineer II or Engineer III) based on:
- Depth of thesis/research experience in robotics, UAV autonomy, perception, or control systems.
- Demonstrated hands-on work in PX4/ArduPilot, SLAM, sensor fusion, or advanced simulation workflows.
- Internships or lab experience involving UAV testing, system integration, or computer vision pipelines.
- Ability to take ownership of specific subsystem modules or small projects early in their tenure.
- Strong publication or competition track record (IEEE Transactions, International Conferences, RoboRacer, SAE Aero, DRDO/ISRO academic programs, etc.).
Working Hours
- Standard working hours are 9:30 AM to 6:30 PM, Monday to Friday.
- Field-testing activities may require early-morning or extended hours, depending on mission requirements.
Compensation Range
- Competitive compensation aligned with industry standards, including performance-based incentives.
- Exact salary ranges can be customised according to experience.
The employer’s company overview, benefits, equal-opportunity statement and generic skills tables are left out here; they are on the original posting.
Text from NewSpace's official job posting, formatted by HireSetu. The employer's own page is the final word on details.
Lead with the drone
The degree list is wide, covering robotics, aerospace, mechatronics, electronics and computer science, and the programming bar is Python or C++. What separates applicants is the line about UAV work through projects, competitions or research. On a fresher CV, describe the UAV project, competition or research work that shows hands-on exposure.
Say which frame you flew, which flight controller, what you tuned, what failed. Bench work counts, and a competition entry that never left the ground counts if you can explain why. MAVLink, Linux and a small Python or C++ script you wrote to pull data off a log all belong near the top.
The sensor fusion line reads senior
The posting asks for a proven ability to lead sensor fusion, state estimation, navigation and control. That reads senior for a 0 to 1 year role, while the rest of the description talks about mentorship, subsystem support and small modules. Take it as the direction the work heads in. Know the EKF basics anyway: how IMU and GPS combine, what drift looks like when one source drops out.
Master's graduates get considered for Engineer II or III on thesis depth and hands-on autonomy work, so one posting covers a few different bars. Applying with a bachelor's and a drone project, you sit in the first group.
Flight days reset your clock
Office hours run 9:30 to 6:30, Monday to Friday, and field testing pulls them earlier and longer when a mission needs it. Pre-flight checks, log collection and troubleshooting after a hard landing come with the territory, and hardware breaks during testing.
Ask which airframe and which stack you'd be on, PX4 or ArduPilot. The two carry different parameter sets and different failure modes, and the bugs you spend your first months chasing depend on which one you land on.
PX4, ArduPilot and the flight stack
PX4 and ArduPilot are autopilot stacks: software that runs on the flight controller, reads IMU, GPS and other sensor inputs, estimates the vehicle’s state and sends commands to the motors. Setting up a flight stack means loading that software onto the controller, mapping inputs and outputs, and tuning parameters such as rate gains, filter settings and failsafes, then checking the effect in a log. MAVLink is the message protocol between the controller and a ground station or companion computer; telemetry, commands and parameter changes travel over it.
Gazebo and Isaac Sim run a vehicle model with simulated sensors, so a control or perception module can be exercised before it meets hardware.
Robotics beside avionics and structures
The avionics role extends ArduPilot, the open-source autopilot, for the company’s drones: adding and changing features in the Copter and Plane code, integrating GPS, IMUs and ESCs, and debugging CAN, MAVLink and SBUS links. Structures designs wings, fuselage and composite or metal parts through CAD, hand calculations and finite element analysis. AI builds agents on large language models. The robotics role assists with navigation, perception and basic autonomy, and sensor integration covers IMUs, cameras, GPS, radar and LiDAR.
The posting names firmware configuration, parameter tuning, simulation in Gazebo or Isaac Sim, and ground and field testing with pre-flight checks, log collection and troubleshooting. The employer guide describes a defence startup where bench tests, board bring-up, flight logs and field trials arrive early, with mentorship from senior engineers and an expectation to contribute quickly.
Prepared from NewSpace's job posting and checked against it before publishing. See our Editorial Policy.
How to apply
- The Apply button opens this job on NewSpace's careers site (newspace.keka.com).
No fees, ever. HireSetu never charges candidates, and no genuine employer asks for money to apply, interview or join. If anyone asks you to pay, stop and report the job.
Similar openings on HireSetu
- AI & Robotics Engineer at Creoleap Technologies — Nagercoil — Embedded · Full-time
- Associate – Robotics Engineer at Roots Group — Coimbatore North — Mechanical · Full-time
- Engineering - Industrial Robotics at Airbus — Bangalore Area — Aerospace · Full-time
- Robotics Software Developer at Addverb — Noida — Software / IT · Full-time
- Robotics Engineer at DexSent Robotics — Chennai — Software / IT · Full-time
View Engineer I – Robotics on HireSetu · More NewSpace jobs · Embedded jobs · Jobs in Bengaluru · Career Insights · FAQ · Companies