Associate Engineer – Mechanical (LV Systems)

Eaton — Pune, Maharashtra

₹4–10 LPA (HireSetu estimate) · 0–3 yrs exp · Freshers eligible · Full-time · onsite

HireSetu listing reference 29d73f — confirm requirements below, then apply on the employer site.

Quick answer: A hybrid role in Pune producing 3D models and 2D drawings for low voltage panels and enclosures, most of it modifying copper busbar and sheet metal parts that already exist. One to three years of mechanical design experience, working GD&T, and a PLM system you have genuinely used.

From Eaton's job posting

What you’ll do

Position’s main focus will be development of 3D models and 2D drawings of sheet metal and busbar components, sub-assemblies and assemblies to support Sustaining and NPI projects.

"We are seeking a motivated individual to support the development and maintenance of Low Voltage Systems and Enclosures. Candidate should be able to do copper busbar and sheet metal design modifications efficiently, contributing to product improvements through collaboration, industrialization, documentation, and technical support. This role requires a willingness to learn new tools and processes while supporting lead engineer in achieving project goals.

Key Responsibilities

Support design modification activities for Low Voltage Systems and Enclosures — ensuring alignment with customer requirements, cost targets, and manufacturing requirements.

Assist in busbar and sheet metal design improvmenets.

Contribute to part and product design modifications with a focus on manufacturability and assembly, applying knowledge of copper busbar, sheet metal, and tooling.

Provide support in engineering analysis of pannels and enclosures to aid robust product development.

Collaborate with senior engineers and lead to ensure product compliance with global standards such as IEC 61439 and other relevant standards.

Should have hands-on experience on drawing creation, practitioner of GD&T and PLM process implementation. "

Qualifications

B.E. Mechanical

1 to 3

Skills

"* Contribute to design improvement activities for Low voltage Systems and Enclosure, including copper busbar and sheet metal components.

  • Support material selection and design optimization using knowledge of copper properties and sheet metal manufacturability.
  • Strong experience of 3D modeling and 2D drafting.
  • Work with PLM systems (e.g., Model Manager, SAP) for design release and change management.
  • Demonstrate a problem-solving mindset and a willingness to learn from experienced team members while contributing to product industrialization and launch readiness.
  • Contribution in developing process and automations to drive productivity."

Creating technical proposals, stakeholder communication, process definition, learning agility and AI

Text from Eaton's official job posting, formatted by HireSetu. The employer's own page is the final word on details.

Change work on parts that already exist

Eaton splits the work between Sustaining and NPI, and the description leans on Sustaining: a busbar reroute, a sheet metal revision, a customer requirement that forces a panel to change. You model it, draw it, release it through PLM, then answer questions about it for months. New mechanical graduates picture concept work on a blank screen. A good share of this is reading an existing design closely enough to alter it without breaking the enclosure around it.

Speed in a 3D tool counts for more here than clever geometry. Drawing discipline matters just as much: standard views, tolerances, title blocks, revision control. GD&T runs through the whole job, so know datum schemes, the symbol set, and how a tolerance stack-up lands on the assembly.

The metal has the final say

Copper busbar and sheet metal are unforgiving. Bend radii, busbar clearances, a fastener you cannot reach with a spanner, a tooling set that will not pay for itself on a small batch. Eaton asks for manufacturability and assembly knowledge, and IEC 61439 sets the temperature rise and clearance rules these assemblies are built to, so a change that looks clean in CAD can fail on the bench.

Ask how closely the design team sits with the Pune manufacturing line, since that decides how quickly you learn what a drawing costs to build. The line about automation, AI and process definition is real work on these teams: small scripts and drawing templates that cut repetitive drafting hours.

Prepared from Eaton's job posting and checked against it before publishing. See our Editorial Policy.

How to apply

  1. The Apply button opens this job on Eaton's careers site (eaton.eightfold.ai).
  2. Its requisition number is 687239405935; search for it on the careers site if the link ever stops working.
  3. The site builds your profile from your resume; check what it pulled before you submit.

Apply on Eaton's site

No fees, ever. HireSetu never charges candidates, and no genuine employer asks for money to apply, interview or join. If anyone asks you to pay, stop and report the job.

Similar openings on HireSetu

View Associate Engineer – Mechanical (LV Systems) on HireSetu · More Eaton jobs · Mechanical jobs · Jobs in Pune · Career Insights · FAQ · Companies

HireSetu
Career Intelligence Platform