PCS - Design

Adani — Ahmedabad, Gujarat

₹4–6 LPA (HireSetu estimate) · Entry level · Freshers eligible · Full-time · onsite

HireSetu listing reference 13011b — confirm requirements below, then apply on the employer site.

Quick answer: A converter design job for battery storage and renewable plants, based at Adani's Shantigram campus in Ahmedabad. You own the PCS architecture, the single-line diagram and the equipment selection, then answer for all three at factory tests and on site.

From Adani's job posting

Key Responsibilities PCS Design & Development

Design and develop PCS architecture for BESS and renewable energy applications.

Define electrical specifications, single-line diagrams (SLD), and system configurations.

Select appropriate inverter, converter, transformer, switchgear, and protection equipment.

Develop technical specifications and engineering design documents.

System Engineering

Perform power system studies, load flow analysis, short-circuit analysis, and protection coordination.

Ensure seamless integration between PCS, Battery Management System (BMS), EMS, and SCADA.

Evaluate grid interconnection requirements and compliance standards.

Support system optimization for efficiency, reliability, and performance.

Design Validation & Testing

Develop validation plans and testing procedures.

Support factory acceptance tests (FAT), site acceptance tests (SAT), and commissioning activities.

Analyze test data and resolve system performance issues.

Ensure compliance with applicable industry standards and regulations.

Technical Documentation

Prepare detailed engineering calculations and reports.

Develop design guidelines, operational manuals, and technical specifications.

Review vendor drawings and technical submissions.

Support certification and regulatory compliance activities.

Cross-Functional Coordination

Collaborate with BMS, EMS, Project Engineering, Procurement, and Quality teams.

Provide technical support during project execution and customer interactions.

Support troubleshooting activities during installation and commissioning.

Continuous Improvement

Evaluate emerging technologies in power electronics and energy storage.

Support cost optimization and design improvement initiatives.

Contribute to innovation and product development activities.

Educational Qualification

B.E./B.Tech/M.E./M.Tech in Electrical Engineering, Power Electronics, Electrical & Electronics Engineering, or related discipline.

Job Identification

56530

Posting Date

08/13/2026, 03:45 PM

Locations

Shantigram, Ahmedabad, Gujarat, 382421, IN

Apply Before

10/28/2026, 03:45 PM

Text from Adani's official job posting, formatted by HireSetu. The employer's own page is the final word on details.

Your drawings get tested in front of you

Design here runs past the document set. The same engineer writes the validation plan and test procedures, sits through factory and site acceptance tests, and works through whatever the test data shows. Commissioning support and troubleshooting during installation are named in the remit.

That suits someone who wants to see the converter energised and the switchgear switched. If your work has been drawings and calculation reports so far, the test bay brings a different kind of pressure: real hardware, a project schedule, and results that come back in numbers.

Lead with the equipment you have sized

The hardware is the spine of this job, so put it first: inverter and converter selection, transformer and switchgear sizing, protection equipment, and the single-line diagram that ties them together. Then the studies, load flow, short-circuit and protection coordination.

BESS exposure comes next, even if it was one project or a battery test setup in college. Grid interconnection and compliance work after that. BMS, EMS and SCADA sit at the edge of the design, so keep them to a line each. A CV that lists every tool in the ad reads as none of them in depth.

Built for people already doing this

The degree bar is wide, B.E. or M.Tech in electrical, power electronics or EEE. The responsibility list is narrower. It assumes you have taken a converter design through to a signed-off drawing set at least once, with the studies behind it.

Switching in from solar EPC, switchgear design or a utility studies team is realistic. Bring one complete design to the conversation: the input, the equipment you chose, the study results, and what you changed after testing. Freshers with a strong power electronics project can apply, but they are betting on that project carrying the conversation.

Onsite at Shantigram

The job sits at Adani's Shantigram campus in north Ahmedabad, full time and onsite, well away from the centre of the city. Where you live is part of the decision. A daily cross-city trip to that edge gets old fast, so look at the commute before you apply.

The posting went up in August and applications close on 28 October 2026. That leaves time to get a design portfolio in order before you send anything.

Prepared from Adani's job posting and checked against it before publishing. See our Editorial Policy.

How to apply

  1. The Apply button opens this job on Adani's careers site (adani.com).
  2. Its requisition number is 56530; search for it on the careers site if the link ever stops working.

Apply on Adani's site

No fees, ever. HireSetu never charges candidates, and no genuine employer asks for money to apply, interview or join. If anyone asks you to pay, stop and report the job.

Similar openings on HireSetu

View PCS - Design on HireSetu · Electrical jobs · Jobs in Ahmedabad · Career Insights · FAQ · Companies

HireSetu
Career Intelligence Platform