Manufacturing Engineer I
jabil — Ranjangaon, Maharashtra
₹4–8 LPA (HireSetu estimate) · Full-time · onsite
HireSetu listing reference 6295f8 · employer requisition J2440861 — confirm requirements below, then apply on the employer site.
Quick answer: An onsite role on the SMT lines at Jabil's Ranjangaon plant. Two duties shape the job: owning the wave and reflow soldering profiles, and the tooling the line runs on.
From jabil's job posting
SUMMARY
Monitor the quality and efficiency performance for assigned manufacturing line(s). Drive continuous improvement through process development, root cause analysis and systematic problem solving; utilize data from CIQ, TARS and other sources as appropriate.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
- Continually strive to balance and optimize line throughput, including efforts to minimize changeover downtime (i.e. common set-ups).
- Monitor machine management data in order to maximize utilization and minimize machine-generated scrap.
- Provide input on creative ways to reduce costs by streamlining processes and systems.
- Create and maintain wave and reflow soldering profiles.
- Ensure that process parameters are within acceptable tolerances for products and components, and result in solder quality that meets IPC-610B requirements (or other applicable standard).
- Design and / or procure production tooling, including stencils, vacuum plates, wave solder pallets and product-specific fixtures and jigs.
- Coordinate line reconfigurations and machine move activities, including equipment arrival, positioning and installation, and scheduling of support groups (Machine Support, Facilities, MIS, etc.) using the approved communication process.
- Verify that machine maintenance is performed as scheduled on assigned line(s).
- Encourage open communication and exchange of information within the M.E. department and between the various support groups.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor’s degree preferred; and one to two years related experience; or equivalent combination of education and experience.
Any scam job listings should be reported to whatever website it was posted in.
Accessibility Accommodation
#whereyoubelong
The employer’s company overview, benefits and equal-opportunity statement are left out here; they are on the original posting.
Text from jabil's official job posting, formatted by HireSetu. The employer's own page is the final word on details.
HireSetu's note
Profiles and tooling carry the job
Wave and reflow profiles are yours to create and maintain, and so are the stencils, vacuum plates, wave solder pallets and product-specific fixtures and jigs. Get a profile wrong and you get cold joints, bridging or tombstoning across a whole run. That is a lot of consequence to hold in a first or second job.
IPC-610B is the acceptance standard named, so learn how a profile shape, soak time, time above liquidus, peak, maps onto the defects you see at inspection. Read the experience bar carefully too: bachelor's preferred, one to two years related, or an equivalent mix of education and experience. A diploma holder with real SMT line time is not shut out.
A floor job, with numbers to back you
The word engineer can raise expectations of design work. On this line it means throughput, changeover downtime, machine utilisation and machine-generated scrap on an assigned line, plus the setup tweaks and process changes that cut cost. CIQ and TARS are the data sources named, so be comfortable pulling numbers and defending a decision with them. You also verify that scheduled maintenance actually happened on your line, which is a fair amount of chasing other teams.
Line, tooling and shifts
Ask which product line or family you would be placed on. Profile and tooling work depends on the board mix and volume, and the answer changes the job considerably. Ask whether tooling is built in-house or bought from vendors and what the lead time looks like, since waiting on a stencil shapes your planning. Line reconfigurations and machine moves pull in Machine Support, Facilities and MIS, so find out who coordinates those and how much of the calendar they take. Confirm the shift pattern before you accept.
Drafted with AI from jabil's job posting and checked by Prashanth Jakkula before publishing. See our Editorial Policy.
How to apply
- Open jabil's careers site with the Apply button.
- Create a Workday account for jabil. Workday logins are separate for every company, so an account made for another employer won't work here.
- Upload your resume and check every auto-filled field; Workday often misreads dates and job titles.
- Answer the screening questions, submit, and look for the confirmation email from Workday.
No fees, ever. HireSetu never charges candidates, and no genuine employer asks for money to apply, interview or join. If anyone asks you to pay, stop and report the job.
Similar openings on HireSetu
- New Product Manufacturing Engineer at Applied Materials — Bengaluru — Manufacturing · Full-time
- Electrical – New Product Manufacturing Engineer at Applied Materials — Bengaluru — Manufacturing · Full-time
- Manufacturing Engineer at Airbound — Bengaluru — Mechanical · Full-time
- Manufacturing Engineer 1 at Lam Research — Bengaluru — Mechanical · Full-time
- Manufacturing Engineer (Aerospace) – Walk-in Drive at ALTEN — Bengaluru — Aerospace · Full-time
View Manufacturing Engineer I on HireSetu · Manufacturing jobs · Career Insights · FAQ · Companies