Engineer – CAD Design (Laundry Products)
Whirlpool — Pune, Maharashtra
₹4–10 LPA (HireSetu estimate) · 1–3 yrs exp · Full-time
HireSetu listing reference 472ffe — confirm requirements below, then apply on the employer site.
Quick answer: A 1 to 3 year mechanical CAD job at Whirlpool's Pune engineering centre, working on laundry product components in Creo. Standards and change control set the rhythm here: ASME Y14.5 GD&T, drawing quality, Windchill.
From Whirlpool's job posting
The team you will be a part of
The Engineering team discovers, develops and evaluates new product ideas, enhancements, or strategic product extensions, and translates research discoveries into usable and marketable products. Leads, plans and tracks all phases of the product life cycle, from inception to introduction into the marketplace. Coordinates with various functions to ensure successful product development and implementation.
This role in summary
The position is responsible for developing/reviewing CAD models/ Assemblies/ drawings for mechanical/ electrical components and subsystems of Laundry Products. Utilizes corporate CAD design system to produce relatively complex models, assemblies, and detailed engineering drawings. Manages assigned tasks within scheduled time constraints.
Your responsibilities will include
- Effective use of plastic & sheet metal part design guide to Create/modify design concepts
- Determine the effect of change on other components/assemblies by geometric studies within the subsystem
- Analysis design using DFM Pro & other Virtual tools to deliver manufacturable design.
- Application of GD&T as per required standard (ASME Y14.5 / ISO 1101)
- Comply with ASME Y14.5 / ISO CAD drafting standards for engineering drawings
- Comply with CAD data management policies and design change processes using Windchill
- Understand & review requirements to produce complete CAD models of components/subsystems in the product
- Identify and resolve potential problems in CAD design and coordinate changes with x-functionals
- Plan and organize multiple tasks, normally within the context of a complex project, resulting in successful delivery on time and with Quality
Education
B.tech from Mechanical Engineering.
Experience: 1-3 Years
Key Deliverables
- Create/update CAD models, drawings, and assemblies using robust CAD modeling in Creo parametric
- Comply with CAD standards, data management policies, and design change process
- Quality Review of CAD drawings & Models
- Ensure expected delivery on Time and at Quality
TECHNICAL
1. Knowledg of plastics/sheet metal part design (Basic)
2. Knowledge of PTC Creo Parametric
(Part Modeling, Surfacing, Sheetmetal & Drafting)
3. Knowledge of ASME Y14.5M/ ISO standards (Preferred)
4. Knowledge of GD&T (Preferred)
5. Knowledge of Windchill (Preferred)
MANAGERIAL
1. Strong communication skills (oral and written)
2. Critical thinking & Problem solving
3. Continuous Improvement Mindset
4. Proficient computer skills
The employer’s company overview, benefits, equal-opportunity statement and generic skills tables are left out here; they are on the original posting.
Text from Whirlpool's official job posting, formatted by HireSetu. The employer's own page is the final word on details.
Put Creo and GD&T first
Those two carry this application. Name Creo Parametric explicitly and spell out part modelling, surfacing, sheetmetal and drafting, since the listing asks for all four and the deliverable is models, assemblies and drawings. A CV that says "CAD" and lists six packages tells a reviewer nothing.
The other half is GD&T to ASME Y14.5 or ISO 1101, along with the drafting standards that decide view layout and tolerances on a drawing. Say which standard you drew to and on what parts. Windchill is marked preferred, and any PLM system where you checked files in and out, revised them and tracked release status is the closest thing to it. DFM Pro sits in the same bracket: a modest plus.
Change control runs the week
Read the responsibilities again: modify concepts, work out how a change hits neighbouring components, review other people's models and drawings, follow the data management policy. This is sustaining engineering as much as fresh design, and a fair share of the job is checking that what someone else modelled is right. Laundry appliances come down to plastic and sheet metal, so expect housings, panels and brackets, with a design guide applied to both.
You'd also be one person on a complex project with several tasks tracked at once, chasing other functions when a change ripples outward. The Pune centre serves global programmes, so some review calls fall outside Indian hours. Confirm which laundry platform you'd be placed on and how late those calls run.
Windchill and DFM Pro in the workflow
Windchill is the product data system that holds CAD files, records each revision and shows whether a model or drawing is released or still under change. Check-in and check-out stop two engineers overwriting the same assembly.
DFM Pro reads a Creo model against manufacturing rules for plastic and sheet metal parts. It flags geometry that clashes with moulding or press rules while the model is still editable.
Inside a design change
Models, assemblies and drawings for laundry components are built in Creo Parametric. Geometric studies compare a changed component against its neighbours and show where the revision clashes.
DFM Pro checks the design against manufacturing rules to keep it manufacturable. Windchill carries the CAD data management policy and the design change process that every file follows.
Prepared from Whirlpool's job posting and checked against it before publishing. See our Editorial Policy.
How to apply
- The Apply button opens this job on Whirlpool's careers site (jobs.whirlpool.com).
- Its requisition number is 34404680508; search for it on the careers site if the link ever stops working.
No fees, ever. HireSetu never charges candidates, and no genuine employer asks for money to apply, interview or join. If anyone asks you to pay, stop and report the job.
Similar openings on HireSetu
- Design Verification Engineer (Analog Power Products) at Texas Instruments — Bengaluru — VLSI · Full-time
- Design Engineer – GDC (Irrigation Design) at Netafim — Pune — Mechanical · Full-time
- Associate I – Engineering Design at UST — Pune — Mechanical · Full-time
- Associate Engineer – Mechanical Design at Eaton — Pune — Mechanical · Full-time
- Assistant Design Engineer at KSB — Pune — Mechanical · Full-time
View Engineer – CAD Design (Laundry Products) on HireSetu · Mechanical jobs · Jobs in Pune · Career Insights · FAQ · Companies