Junior Production Associate

ROCKWOOL — Chennai, Tamil Nadu

₹3–7 LPA (HireSetu estimate) · Entry level · Freshers eligible · Full-time

HireSetu listing reference 68cef7 · employer requisition R0036923 — confirm requirements below, then apply on the employer site.

Quick answer: A shift-based control room seat at ROCKWOOL's Chennai cupola, where you watch melt, charging and spinner parameters on WinCC screens, keep the log books straight, and hand the plant over clean at both ends of your shift.

From ROCKWOOL's job posting

Area: - Cupola

Responsibilities

  • Take the charge from previous shift associate including proper house-keeping.
  • Ensure all PPE are in place
  • Check 11 meter axis register entry .
  • Check that during breakdown & shutdown maintenance people are working with proper Work permit and LOTO
  • See the production plan, all process parameters related to production, the size of raw-material is as per specification or not and check the recipe of raw material and coke, if any change done in process parameter or in recipe inform to executive engineer-production.
  • Check the schedule of next iron tapping (whether it is on line or off line) and spinner-change and if any product change over or any major downtime then ask executive engineer-production to club them.
  • Fill log-sheet/log bookes (PR/ML-F-11, PR/ML-F-12, PR/ML-F-19)
  • Tell QC to check the coke moisture and ask QC for LOI reading at appropriate time.
  • If any break-down or any abnormality, any trouble shooting in cupola or in process then inform to executive engineer-production and maintenance immediately
  • Before product change or iron tapping inform to executive engineer-production, curing oven department, cold-end department, electrical and mechanical maintenance department.
  • Log the PKF before shift end.
  • Keep continues watch on charging, co-combustion parameter, SPC chamber, spinner, binder, cupola and spinner cooling display on Wincc, melt position on spinner, pendulum swing on CCTV camera display.
  • Maintain proper house-keeping of equipment, floor and control-room.
  • Reviewing process parameter sheet of cupola during production & to inform executive engineer-production if any deviation.
  • Handover charge to next shift associate including proper house-keeping.
  • Before product change over ensure that we have proper set-up for new product and curing oven and cold-end associate are ready with new product set-up.
  • If any feedback from QC or executive engineer-production related to defect in product inform to field associate and take necessary action to rectify the problem.
  • To perform other ad HAC job given by immediate supervisor.

Text from ROCKWOOL's official job posting, formatted by HireSetu. The employer's own page is the final word on details.

The handover is the job

You open by taking charge from the outgoing associate, checking housekeeping, and you close by handing that same charge back with the log books filled. In between sit PR/ML-F-11, PR/ML-F-12, PR/ML-F-19 and the PKF log before shift end. That paperwork is how the next eight hours get planned, so an unwritten deviation becomes someone else's breakdown.

Learn what a shift log is actually for before you walk in. Operators who record numbers properly get trusted with more of the process; the ones who leave blanks get watched.

Several screens, one pair of eyes

The WinCC pages cover charging, co-combustion, the SPC chamber, spinner and cupola cooling, binder, melt position on the spinner, and a CCTV feed for pendulum swing. Add QC requests for coke moisture and LOI readings at the right moment, plus checking raw material size and the coke recipe against spec.

Before day one, get comfortable with two things: what loss on ignition tells you about a melt, and how to read a trend line without reacting to a single spike. Both come up hourly here.

You hold the permit line

During a breakdown or shutdown, this seat checks that maintenance crews are working on a valid permit with LOTO applied. That gives a junior associate real authority: you can hold work until the paperwork matches. Almost everything else escalates to the executive engineer-production, from a recipe change to clubbing a product changeover with planned downtime, and notices go out to curing oven, cold-end, electrical and mechanical before a tap or changeover.

A cupola runs continuously, so expect a rotation across shifts at the Chennai plant.

Prepared from ROCKWOOL's job posting and checked against it before publishing. See our Editorial Policy.

How to apply

  1. The Apply button opens this job on ROCKWOOL's careers site (rockwoolgroup.wd3.myworkdayjobs.com).
  2. Its requisition number is R0036923-1; search for it on the careers site if the link ever stops working.
  3. Workday logins are separate for every company, so you need an account made for ROCKWOOL.

Apply on ROCKWOOL's site

No fees, ever. HireSetu never charges candidates, and no genuine employer asks for money to apply, interview or join. If anyone asks you to pay, stop and report the job.

Similar openings on HireSetu

View Junior Production Associate on HireSetu · Manufacturing jobs · Jobs in Chennai · Career Insights · FAQ · Companies

HireSetu
Career Intelligence Platform