Structural Mechanics Engineer
KSB — Pune, Maharashtra
₹3–7 LPA (HireSetu estimate) · Entry level · Freshers eligible · Full-time · hybrid · Apply by 30 Nov 2026
HireSetu listing reference f2cb91 — confirm requirements below, then apply on the employer site.
Quick answer: Static and dynamic stress work in ANSYS at KSB's Pune office, hybrid, covering pressure, thermal, wind and seismic loads. Rotor dynamics sits alongside it, the reports go to clients, and part of the job is building the in-house tools the analysis runs on.
From KSB's job posting
- Perform static and dynamic stress analysis of components and equipment subjected to pressure, thermal, wind, seismic, and other loadings using ANSYS.
- Determine natural frequencies using commercial analysis software and/or in-house developed tools.
- Analyze rotor dynamic behavior using commercial software and/or in-house developed tools.
- Perform analyses in accordance with applicable international codes, standards, and customer-specific requirements & Prepare analysis reports as technical documentation for client submission.
- Recommend design modifications, improvements to design, and construction engineers based on analytical findings.
- Develop new or modify existing software/firmware tools required for structural and rotor dynamic analysis.
- Work independently or under partial/full technical guidance, depending on project requirements.
- Regularly communicate project status and progress updates to clients and other stakeholders.
- Travel domestically / internationally to customers, manufacturing, testing, and operational sites as required by project and customer needs
Text from KSB's official job posting, formatted by HireSetu. The employer's own page is the final word on details.
Rotor dynamics is the harder half
Static cases under pressure and thermal load are the base of this job. The listing also asks for natural frequency extraction and rotor dynamic analysis, which is a different discipline: critical speeds, bearing stiffness, unbalance response, how a spinning shaft behaves away from its design point. Engineers who have only run static studies on a bracket will find that gap wider than it looks, and machine dynamics or vibration coursework counts for more here than another CAD package.
The analysis follows international codes and customer specifications. Which code applies depends on the product and the buyer, and it decides how much margin you carry, so find out early which ones the Pune team works to.
The write-up is part of the deliverable
Analysis reports here are technical documentation submitted to clients, not internal notes. Assumptions, boundary conditions, mesh choices and the code clause you leaned on all get read by someone outside KSB, and status updates to clients and stakeholders are a standing item in the week. A sample report, a thesis chapter or a project write-up that lays out method and results cleanly is worth attaching; contour plots on their own say very little.
Scripting and travel, both easy to skim
Two lines in this posting deserve a second read. One is developing or modifying software and firmware tools for structural and rotordynamic analysis, which sits alongside the ANSYS work. In practice that means scripting around the solver or keeping an in-house program running. Automation you have written, even a small script that pushed a batch of load cases through, belongs near the top of your CV next to the FEA projects.
The other is travel: domestic and international trips to customer sites, manufacturing, testing and operational locations. A hybrid week in Pune can turn into a week at a test bed, so ask how much the team travels and for how long.
Prepared from KSB's job posting and checked against it before publishing. See our Editorial Policy.
How to apply
- The Apply button opens this job on KSB's careers site (ksb.wd3.myworkdayjobs.com).
- Its requisition number is 31162; search for it on the careers site if the link ever stops working.
- Applications close on 30 Nov 2026.
- Workday logins are separate for every company, so you need an account made for KSB.
No fees, ever. HireSetu never charges candidates, and no genuine employer asks for money to apply, interview or join. If anyone asks you to pay, stop and report the job.
Similar openings on HireSetu
- Engineer – Structural Dynamics at Eaton — Pune — Mechanical · Full-time
- Engineer M&S ESA – Structural Dynamics at Eaton — India — Mechanical · Full-time
View Structural Mechanics Engineer on HireSetu · Mechanical jobs · Jobs in Pune · Career Insights · FAQ · Companies