Associate Engineer – Ecodesign

Eaton — Pune, Maharashtra

₹3–6 LPA (HireSetu estimate) · 0–3 yrs exp · Freshers eligible · Full-time · onsite

HireSetu listing reference 603481 — confirm requirements below, then apply on the employer site.

Quick answer: The core of this job is running life cycle assessments on Eaton's electrical products to ISO 14040 and 14044, then taking those studies through third-party verification so they can be published as Type III EPDs. Environmental science or chemical, mechanical, electronics and electrical engineering degrees all qualify, at 0 to 3 years.

From Eaton's job posting

What you’ll do

Eaton’s Center for Sustainability is looking for highly motivated individuals who is passionate about environmental accounting and has strong inclination towards Sustainability domain. The Associate Engineer will be supporting Product Environment profiles (PEP) / Environmental Product declarations (EPDs) through life cycle assessment (LCA) and Design for Environment for New Product Introduction, compliance (climate and environmental regulations) for Eaton’s broad portfolio of electrical products. This work will help business across the enterprise meet customer requests related to Life Cycle Assessment, address regulatory challenges and create sustainability value propositions to gain additional business opportunities.

"1. Execute detailed Life Cycle Assessment (LCA) studies as per ISO 14040 & 14044 to evaluate environmental impacts of Eaton electrical products followed by 3rd party verification to publish type-III Environmental Product Declarations (EPD) with support of Engineers.

2. Support development of modular LCAs & creation a library of Eaton standard components & processes.

3. Support the product engineering teams on the calculation of greenhouse gas emissions associated with the electrical product’s lifecycle.

4. Support evaluation of compliance in accordance with applicable eco-design related regulations (e.g. EU-ErP Directive)

5. Understand customer requirements and communicate to other Eaton teams

6. Provide regular reports on development and support activities.

7. Support Design-For-Environment activities for new product development projects

8. Contribute to continuous process improvements to increase productivity and efficiency."

Qualifications

Bachelors degree in Enviornmental science or Chemical/Mechanical/ Electronics /Electricals engineering

Bachelors with 0-3 years’ experience in the areas of Sustainability domain, Product or technology development for Industrial, Electrical products or process.

Skills

"1. Need to have sound fundamental engineering knowledge.

2. Has a basic understanding of requirements related to eco-design regulations.

3. Has an understanding of Life Cycle Assessment standards (ISO 14040/44/25)

4. Has experience of conducting LCA as per the specific rules as (ISO14040/44/25). LCA according to PEP-EcoPassport Product Category Rules/ Product Specific Rules will be bonus.

a. Demonstrates LCA modelling using software like EIME (preferably), SimaPro, Sphera/GaBi, OpenLCA or any similar software.

b. Demonstrates understanding related to goal & scope definition & Life Cycle Inventory (LCI) data requirements.

c. Can analyze LCA results for hotspots and support interpretation.

d. Communicate the LCA impacts to internal and external stakeholders.

5. Basic understanding on REACH, RoHS, Prop65 and other applicable regulations and its impact on product and technology will be added advantage.

6. Comfortable dealing with data and Microsoft office applications (Excel, PowerPoint, Word)"

"1. Good verbal and written communication skills including the ability to effectively explain technical concepts.

2. Good judgment, time management, and decision-making skills"

Text from Eaton's official job posting, formatted by HireSetu. The employer's own page is the final word on details.

Modelling in a real LCA tool

EIME is the preferred software, with SimaPro, Sphera/GaBi and OpenLCA named as acceptable. If your only LCA project ran in one of those, describe what you built: the functional unit, the system boundary, where the inventory numbers came from. That last part is where beginner answers fall apart.

ISO 14040/44/25 are stated requirements, and the PEP EcoPassport category and product-specific rules are a bonus. Knowing what a verifier checks in a Type III declaration is more use than another software tutorial.

Engineering data work, mostly

Sustainability in a job title brings to mind ESG reports and carbon pledges. Here the material is individual products: materials, manufacturing steps, transport, use and end of life, modelled and then defended. Electrical products means breakers, switchgear and components.

People who last in this work enjoy tracing a number to its source and arguing about how it was allocated.

Where two or three years points

LCA practitioner, product stewardship, environmental compliance and sustainability roles inside manufacturing companies are the next moves. The verification experience is what counts: a study that survives an external reviewer, with your name on the response to their comments, carries more weight than a coursework model.

REACH, RoHS and Prop 65 are listed as an advantage, and they are the language product compliance teams speak.

Worth clarifying on the call

Ask which business units and product lines you would cover. Eaton's electrical portfolio is wide, and that answer decides whether you stay a generalist or specialise in a few categories. Ask which LCA tool is licensed and in daily use.

Then the workload split: how much is new studies against maintaining existing PEPs, and who handles the back-and-forth with the third-party verifier. Whether the role sits in the Center for Sustainability or alongside product engineering shapes the day-to-day.

From inventory to verified declaration

An LCA starts with a goal and scope statement: the product, functional unit, boundary and rules. The inventory lists every material, process, transport and energy input. EIME or SimaPro links those entries to impact factors.

Hotspot analysis ranks contributions so the engineer can explain which stage drives the result. A PEP is the product's environmental profile; a Type III EPD is the verified public declaration built from it.

Placement of the sustainability team

Eaton's Center for Sustainability runs these assessments for electrical products and checks aerospace parts against chemical rules such as REACH, RoHS and PFAS limits. The employer guide places that team among the Pune groups that stay with Eaton after the Mobility Group separation, alongside electrical, aerospace, software, finance and supply chain.

Its hiring takes environmental science and chemical engineering graduates alongside mechanical and electrical ones.

Prepared from Eaton's job posting and checked against it before publishing. See our Editorial Policy.

How to apply

  1. The Apply button opens this job on Eaton's careers site (eaton.eightfold.ai).
  2. Its requisition number is 687239404473; search for it on the careers site if the link ever stops working.
  3. The site builds your profile from your resume; check what it pulled before you submit.

Apply on Eaton's site

No fees, ever. HireSetu never charges candidates, and no genuine employer asks for money to apply, interview or join. If anyone asks you to pay, stop and report the job.

View Associate Engineer – Ecodesign on HireSetu · More Eaton jobs · Mechanical jobs · Jobs in Pune · Career Insights · FAQ · Companies

HireSetu
Career Intelligence Platform